Page 1 of 1
Zip file directory structure
Posted: Sun Oct 23, 2005 8:58 pm
by anonymouse
How do I just pack the files and not the folders that contain it from the route of the drive.
Zip file directory structure
Posted: Sun Oct 23, 2005 11:44 pm
by Oleg
In order to store directory structure from some folder (not from root) you should do this:
- change current folder to necessary folder;
- pack "*.*" files. Do not specify the full path.
See example below
Code: Select all
;**********************
;* RoboTask Task file *
;* Do not edit! *
;**********************
[Root]
ActionAfterRun=INTEGER|0
Actions=FOLDER
Automat=INTEGER|-1
CatID=INTEGER|1807969784
ContinueOnError=INTEGER|0
ExternalName=STRING|"Task314"
Hide=INTEGER|0
ID=INTEGER|1528195730
Name=STRING|"Pack files from current folder"
Priority=INTEGER|3
RunOnClose=INTEGER|0
RunOnStartup=INTEGER|0
ToLog=INTEGER|3
[Actions]
Action1=FOLDER
Action2=FOLDER
[Actions\Action1]
ActionID=STRING|"A_FOLDER_CHANGE"
Enabled=INTEGER|-1
Name=STRING|"Change Folder (C:\Temp\joy\Disk1)"
Params=FOLDER
[Actions\Action1\Params]
folder=STRING|"C:\Temp\joy\Disk1"
[Actions\Action2]
ActionID=STRING|"A_ZIP_PACK"
Enabled=INTEGER|-1
Name=STRING|"Pack Files"
Params=FOLDER
[Actions\Action2\Params]
action=STRING|"0"
coment0=STRING|"{DateTime}, {DayOfWeek}"
coment1=STRING|"This zip-archive created by RoboTask"
comentcount=STRING|"2"
compreslevel=STRING|"1"
destfile=STRING|"c:\testfile.zip"
dosformat=STRING|"0"
file0=STRING|"*.*"
filecount=STRING|"1"
includesubfolders=STRING|"1"
incsysandhidden=STRING|"0"
junkdirnames=STRING|"0"
password=STRING|"2616925963249432699077676"
Zip file directory structure
Posted: Thu Apr 20, 2006 1:45 pm
by jmail137
I am having trouble with a variation of this command. like first user I would like to zip files without the path from root. but I have multiple files in one folder that need to be zipped into their own zip file. in other words. c:\music\ folder contains 12 files. I am trying to make a task that creates a zip file for each file and without the directory structure. I have created a loop command and made that run sucessfully, I have also used the above example successfully. but I am having a hard time combining the two. any suggestions?
thanks, Jmail137
Zip file directory structure
Posted: Thu Apr 20, 2006 2:22 pm
by jmail137
I figured out a way to do it! here is a sample.
Code: Select all
;**********************
;* RoboTask Task file *
;* Do not edit! *
;**********************
[Root]
ActionAfterRun=INTEGER|0
Actions=FOLDER
Automat=INTEGER|0
CatID=INTEGER|0
ContinueOnError=INTEGER|0
ExternalName=STRING|"Task5"
Hide=INTEGER|0
ID=INTEGER|585389684
Name=STRING|"loop zip"
Priority=INTEGER|3
RunOnClose=INTEGER|0
RunOnStartup=INTEGER|0
ToLog=INTEGER|2
[Actions]
Action1=FOLDER
Action10=FOLDER
Action11=FOLDER
Action12=FOLDER
Action13=FOLDER
Action14=FOLDER
Action15=FOLDER
Action16=FOLDER
Action17=FOLDER
Action18=FOLDER
Action19=FOLDER
Action2=FOLDER
Action20=FOLDER
Action21=FOLDER
Action3=FOLDER
Action4=FOLDER
Action5=FOLDER
Action6=FOLDER
Action7=FOLDER
Action8=FOLDER
Action9=FOLDER
[Actions\Action1]
ActionID=STRING|"A_FOLDER_CREATE"
Enabled=INTEGER|0
Name=STRING|"Create Folder (C:\binaries)"
Params=FOLDER
[Actions\Action1\Params]
newfolder=STRING|"C:\binaries"
[Actions\Action10]
ActionID=STRING|"A_VARIABLES_SET"
Enabled=INTEGER|-1
Name=STRING|"Set varible ""F_COUNT"" with value ""0"""
Params=FOLDER
[Actions\Action10\Params]
varname=STRING|"F_COUNT"
varvalue=STRING|"0"
[Actions\Action11]
ActionID=STRING|"A_LOOP_FILE"
Enabled=INTEGER|-1
Name=STRING|"File Loop"
Params=FOLDER
[Actions\Action11\Params]
createmode=STRING|"1"
date1=STRING|"20040323"
date2=STRING|"20040323"
destvar=STRING|"FILENAME"
DuringDays=STRING|"1"
DuringMonths=STRING|"1"
file0=STRING|"{SELECTEDFOLDER}\*.*"
filecount=STRING|"1"
OlderDays=STRING|"1"
OlderMonths=STRING|"1"
savesize=STRING|"0"
savevar=STRING|"FILESIZE"
searchkind=STRING|"0"
subdirs=STRING|"0"
timesize=STRING|"0"
WithoutPath=STRING|"1"
[Actions\Action12]
ActionID=STRING|"A_VARIABLES_INCREMENT"
Enabled=INTEGER|-1
Name=STRING|"Increment variable ""F_Count"""
Params=FOLDER
[Actions\Action12\Params]
incement=STRING|"1"
vaiable=STRING|"F_Count"
[Actions\Action13]
ActionID=STRING|"A_FOLDER_CHANGE"
Enabled=INTEGER|-1
Name=STRING|"Change Folder (c:\binaries)"
Params=FOLDER
[Actions\Action13\Params]
folder=STRING|"c:\binaries"
[Actions\Action14]
ActionID=STRING|"A_ZIP_PACK"
Enabled=INTEGER|-1
Name=STRING|"Pack Files"
Params=FOLDER
[Actions\Action14\Params]
action=STRING|"0"
coment0=STRING|"{DateTime}, {DayOfWeek}"
coment1=STRING|"This zip-archive created by RoboTask (C) 2003 Neowise"
comentcount=STRING|"2"
compreslevel=STRING|"1"
destfile=STRING|"{ZIPFOLDER}\{filename}.zip"
dosformat=STRING|"0"
file0=STRING|"{filename}"
filecount=STRING|"1"
includesubfolders=STRING|"0"
incsysandhidden=STRING|"0"
junkdirnames=STRING|"0"
password=STRING|"3923338567377903831739325"
[Actions\Action15]
ActionID=STRING|"A_LOOP_END"
Enabled=INTEGER|-1
Name=STRING|"End Loop"
[Actions\Action16]
ActionID=STRING|"A_FLOW_ENDIF"
Enabled=INTEGER|-1
Name=STRING|"End If"
[Actions\Action17]
ActionID=STRING|"A_GENERAL_PAUSE"
Enabled=INTEGER|-1
Name=STRING|"Delay 2500 ms"
Params=FOLDER
[Actions\Action17\Params]
delay=STRING|"25"
[Actions\Action18]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""F_COUNT"""
Params=FOLDER
[Actions\Action18\Params]
varname=STRING|"F_COUNT"
[Actions\Action19]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""TOTAL_SIZE"""
Params=FOLDER
[Actions\Action19\Params]
varname=STRING|"TOTAL_SIZE"
[Actions\Action2]
ActionID=STRING|"A_FOLDER_CREATE"
Enabled=INTEGER|0
Name=STRING|"Create Folder (C:\zip)"
Params=FOLDER
[Actions\Action2\Params]
newfolder=STRING|"C:\zip"
[Actions\Action20]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""FLENAME"""
Params=FOLDER
[Actions\Action20\Params]
varname=STRING|"FLENAME"
[Actions\Action21]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""FILESIZE"""
Params=FOLDER
[Actions\Action21\Params]
varname=STRING|"FILESIZE"
[Actions\Action3]
ActionID=STRING|"A_DIALOG_MESSAGE"
Enabled=INTEGER|0
Name=STRING|"Show ""This task zips files located in a folder to thier own zip folder,"""
Params=FOLDER
[Actions\Action3\Params]
icon=STRING|"1"
msg0=STRING|"This task zips files located in a folder to thier own zip folder,"
msg1=STRING|"and includes a password."
msgcount=STRING|"2"
playsound=STRING|"0"
showmessage=STRING|"1"
[Actions\Action4]
ActionID=STRING|"A_DIALOG_BROWSEFOLDERS"
Enabled=INTEGER|0
Name=STRING|"Browse for Folders"
Params=FOLDER
[Actions\Action4\Params]
caption=STRING|"Select Target Folder"
default=STRING|"None"
filter=STRING|"Text files|*.txt|All files|*.*|"
folder=STRING|"C:\binaries"
variable=STRING|"SELECTEDFOLDER"
[Actions\Action5]
ActionID=STRING|"A_DIALOG_BROWSEFOLDERS"
Enabled=INTEGER|-1
Name=STRING|"Browse for Folders"
Params=FOLDER
[Actions\Action5\Params]
caption=STRING|"Select Output Folder for Zip files"
default=STRING|"None"
filter=STRING|"Text files|*.txt|All files|*.*|"
folder=STRING|"C:\zip"
variable=STRING|"{ZIPFOLDER}"
[Actions\Action6]
ActionID=STRING|"A_GENERAL_PAUSE"
Enabled=INTEGER|-1
Name=STRING|"Delay 1000 ms"
Params=FOLDER
[Actions\Action6\Params]
delay=STRING|"10"
[Actions\Action7]
ActionID=STRING|"A_FLOW_IF"
Enabled=INTEGER|-1
Name=STRING|"If Then"
Params=FOLDER
[Actions\Action7\Params]
case=STRING|"0"
operator=STRING|"0"
type=STRING|"0"
value1=STRING|"{SELECTEDFOLDER}"
value2=STRING|"None"
[Actions\Action8]
ActionID=STRING|"A_DIALOG_MESSAGE"
Enabled=INTEGER|-1
Name=STRING|"Show ""[{Time}, {DayOfWeek}, {Date}]"""
Params=FOLDER
[Actions\Action8\Params]
icon=STRING|"1"
msg0=STRING|"[{Time}, {DayOfWeek}, {Date}]"
msg1=STRING|"No Folder is Selected"
msgcount=STRING|"2"
playsound=STRING|"0"
showmessage=STRING|"1"
[Actions\Action9]
ActionID=STRING|"A_FLOW_ELSE"
Enabled=INTEGER|-1
Name=STRING|"Else"
Zip file directory structure
Posted: Fri Apr 21, 2006 3:06 am
by Oleg
I've modified your task, see below. Advice: use the {ExtractFileName()} variable to extract filename only.
For example: {ZIPFOLDER}\{ExtractFileName({filename})}.zip
Code: Select all
;**********************
;* RoboTask Task file *
;* Do not edit! *
;**********************
[Root]
ActionAfterRun=INTEGER|0
Actions=FOLDER
Automat=INTEGER|0
CatID=INTEGER|1614811947
ContinueOnError=INTEGER|0
ExternalName=STRING|"Task406"
Hide=INTEGER|0
ID=INTEGER|585389684
Name=STRING|"loop zip (single file per archive)"
Priority=INTEGER|3
RunOnClose=INTEGER|0
RunOnStartup=INTEGER|0
ToLog=INTEGER|2
[Actions]
Action1=FOLDER
Action10=FOLDER
Action11=FOLDER
Action12=FOLDER
Action13=FOLDER
Action14=FOLDER
Action15=FOLDER
Action16=FOLDER
Action17=FOLDER
Action18=FOLDER
Action19=FOLDER
Action2=FOLDER
Action20=FOLDER
Action3=FOLDER
Action4=FOLDER
Action5=FOLDER
Action6=FOLDER
Action7=FOLDER
Action8=FOLDER
Action9=FOLDER
[Actions\Action1]
ActionID=STRING|"A_FOLDER_CREATE"
Enabled=INTEGER|-1
Name=STRING|"Create Folder (C:\binaries)"
Params=FOLDER
[Actions\Action1\Params]
newfolder=STRING|"C:\binaries"
[Actions\Action10]
ActionID=STRING|"A_VARIABLES_SET"
Enabled=INTEGER|-1
Name=STRING|"Set varible ""F_COUNT"" with value ""0"""
Params=FOLDER
[Actions\Action10\Params]
varname=STRING|"F_COUNT"
varvalue=STRING|"0"
[Actions\Action11]
ActionID=STRING|"A_LOOP_FILE"
Enabled=INTEGER|-1
Name=STRING|"File Loop"
Params=FOLDER
[Actions\Action11\Params]
createmode=STRING|"1"
date1=STRING|"20040323"
date2=STRING|"20040323"
destvar=STRING|"FILENAME"
DuringDays=STRING|"1"
DuringMonths=STRING|"1"
file0=STRING|"{SELECTEDFOLDER}\*.*"
filecount=STRING|"1"
OlderDays=STRING|"1"
OlderMonths=STRING|"1"
savesize=STRING|"0"
savevar=STRING|"FILESIZE"
searchkind=STRING|"0"
subdirs=STRING|"0"
timesize=STRING|"0"
WithoutPath=STRING|"0"
[Actions\Action12]
ActionID=STRING|"A_VARIABLES_INCREMENT"
Enabled=INTEGER|-1
Name=STRING|"Increment variable ""F_Count"""
Params=FOLDER
[Actions\Action12\Params]
incement=STRING|"1"
vaiable=STRING|"F_Count"
[Actions\Action13]
ActionID=STRING|"A_ZIP_PACK"
Enabled=INTEGER|-1
Name=STRING|"Pack Files"
Params=FOLDER
[Actions\Action13\Params]
action=STRING|"0"
coment0=STRING|"{DateTime}, {DayOfWeek}"
coment1=STRING|"This zip-archive created by RoboTask (C) 2003 Neowise"
comentcount=STRING|"2"
compreslevel=STRING|"1"
destfile=STRING|"{ZIPFOLDER}\{ExtractFileName({filename})}.z ip"
dosformat=STRING|"0"
file0=STRING|"{filename}"
filecount=STRING|"1"
includesubfolders=STRING|"0"
incsysandhidden=STRING|"0"
junkdirnames=STRING|"1"
password=STRING|"2514524941259702596715215"
[Actions\Action14]
ActionID=STRING|"A_LOOP_END"
Enabled=INTEGER|-1
Name=STRING|"End Loop"
[Actions\Action15]
ActionID=STRING|"A_FLOW_ENDIF"
Enabled=INTEGER|-1
Name=STRING|"End If"
[Actions\Action16]
ActionID=STRING|"A_GENERAL_PAUSE"
Enabled=INTEGER|-1
Name=STRING|"Delay 2500 ms"
Params=FOLDER
[Actions\Action16\Params]
delay=STRING|"25"
[Actions\Action17]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""F_COUNT"""
Params=FOLDER
[Actions\Action17\Params]
varname=STRING|"F_COUNT"
[Actions\Action18]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""TOTAL_SIZE"""
Params=FOLDER
[Actions\Action18\Params]
varname=STRING|"TOTAL_SIZE"
[Actions\Action19]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""FLENAME"""
Params=FOLDER
[Actions\Action19\Params]
varname=STRING|"FLENAME"
[Actions\Action2]
ActionID=STRING|"A_FOLDER_CREATE"
Enabled=INTEGER|-1
Name=STRING|"Create Folder (C:\zip)"
Params=FOLDER
[Actions\Action2\Params]
newfolder=STRING|"C:\zip"
[Actions\Action20]
ActionID=STRING|"A_VARIABLES_REMOVE"
Enabled=INTEGER|-1
Name=STRING|"Remove variable ""FILESIZE"""
Params=FOLDER
[Actions\Action20\Params]
varname=STRING|"FILESIZE"
[Actions\Action3]
ActionID=STRING|"A_DIALOG_MESSAGE"
Enabled=INTEGER|0
Name=STRING|"Show ""This task zips files located in a folder to thier own zip folder,"""
Params=FOLDER
[Actions\Action3\Params]
icon=STRING|"1"
msg0=STRING|"This task zips files located in a folder to thier own zip folder,"
msg1=STRING|"and includes a password."
msgcount=STRING|"2"
playsound=STRING|"0"
showmessage=STRING|"1"
[Actions\Action4]
ActionID=STRING|"A_DIALOG_BROWSEFOLDERS"
Enabled=INTEGER|-1
Name=STRING|"Browse for Folders"
Params=FOLDER
[Actions\Action4\Params]
caption=STRING|"Select source Folder"
default=STRING|"None"
filter=STRING|"Text files|*.txt|All files|*.*|"
folder=STRING|"C:\binaries"
variable=STRING|"SELECTEDFOLDER"
[Actions\Action5]
ActionID=STRING|"A_DIALOG_BROWSEFOLDERS"
Enabled=INTEGER|-1
Name=STRING|"Browse for Folders"
Params=FOLDER
[Actions\Action5\Params]
caption=STRING|"Select Output Folder for Zip files"
default=STRING|"None"
filter=STRING|"Text files|*.txt|All files|*.*|"
folder=STRING|"C:\zip"
variable=STRING|"{ZIPFOLDER}"
[Actions\Action6]
ActionID=STRING|"A_GENERAL_PAUSE"
Enabled=INTEGER|-1
Name=STRING|"Delay 1000 ms"
Params=FOLDER
[Actions\Action6\Params]
delay=STRING|"10"
[Actions\Action7]
ActionID=STRING|"A_FLOW_IF"
Enabled=INTEGER|-1
Name=STRING|"If Then"
Params=FOLDER
[Actions\Action7\Params]
case=STRING|"0"
operator=STRING|"0"
type=STRING|"0"
value1=STRING|"{SELECTEDFOLDER}"
value2=STRING|"None"
[Actions\Action8]
ActionID=STRING|"A_DIALOG_MESSAGE"
Enabled=INTEGER|-1
Name=STRING|"Show ""[{Time}, {DayOfWeek}, {Date}]"""
Params=FOLDER
[Actions\Action8\Params]
icon=STRING|"1"
msg0=STRING|"[{Time}, {DayOfWeek}, {Date}]"
msg1=STRING|"No Folder is Selected"
msgcount=STRING|"2"
playsound=STRING|"0"
showmessage=STRING|"1"
[Actions\Action9]
ActionID=STRING|"A_FLOW_ELSE"
Enabled=INTEGER|-1
Name=STRING|"Else"
Zip file directory structure
Posted: Mon Apr 24, 2006 7:04 am
by jmail137
thanks Oleg,
I am glad to contribute to this forum.
Thanks for the improvement too!
Jmail